Resilient Seat Gate Valve

Gate Valve is a mechanical device used and install into a pipeline mean for controlling the flow water. Normally, the gate valve is operated in fully open position during normal water flow system. Sometimes, if there is maintenance job is undertaken then gate valve in the specified pipeline is to be fully close to obstruct the water flow from running through the pipeline, further reduce the wastage of water. AVA Gate Valve is design to allow the replacement sealing system when the valve is under pressure and in fully open position.

Specification of AVA Gate Valve a. Standard : BS 5163 : 1986 Type B b. Design : Inside Screw Non Rising Stem Resilient Seat c. Material : Ductile Iron d. Nominal Size : 50mm - 400mm e. Nominal Pressure : PN06 ( 6 Bar ), PN10 ( 10 Bar ), PN16 ( 16 Bar )  f. Coating : Cold Applied High Solid Epoxy Coating. : Hot Applied Fusion Bonded Epoxy Powder Coating. g. Flange Drilling Standard : BS 4504 Section 3.2 1989 PN16

Back